Plant Capabilities


Manufacturing Capabilities

EngSpur, Helical & Double Helical Gears.
Low Speed Heavy Duty & High Speed Turbomachinery.

Description Ref Tempered & Ground** Carburized & Ground
MIN. MAX. MIN. MAX.
Inch / mm Inch / mm
External Diameter A 1” / 25.4 mm 196" / 5,000 mm 1" / 25.4 mm 78" / 2,000 mm
Face Width B 1" / 25.4 mm 76" / 1,950 mm 1" / 25.4 mm 76" / 1,950 mm
Double Helical Gap Width* C* 1/2" / 12.7 mm 4" / 101 mm 1/2" / 12.7 mm 4" / 101 mm
Normal Diametral Pitch DP-12 DP-0.785 DP-12 DP-0.785
Normal Module Mn-2 Mn-32 Mn-2 Mn-32
AGMA QUALITY AGMA 8 AGMA 10 AGMA 10 AGMA 15
Hardness 335 BHN 415 BHN 55 Hrc 62 Hrc

C* Only Double Helical Gears. The Gap width can vary depending on the teeth module.
** With Trough-Hardened gears (Tempered) the grinding process improves the tooth contact increasing the power transmission capability considerably, the grinding process is optional and may apply additional costs.

Diagram

Manufacturing Capabilities

Spur, Helical & Double Helical Pinion Shafts.
Low Speed Heavy Duty & High Speed Turbomachiner.

Description Ref Tempered & Ground** Carburized & Ground
MIN. MAX. MIN. MAX.
Inch / mm Inch / mm
External Diameter A 2" / 50.8 mm 49" / 1,250 mm 2" / 50.8 mm 49" / 1,250 mm
Total Length B 10" / 254 mm 157" / 4,000 mm 10" / 254 mm 157" / 4,000 mm
Double Helical Gap Width* C* 1/2" / 12.7 mm 4" / 101 mm 1/2" / 12.7 mm 4" / 101 mm
Face Width D 1" / 25.4 mm 76" / 1,950 mm 1" / 25.4 mm 76" / 1,950 mm
Extention Diameter E 1" / 25.4 mm 16" / 406 mm 1" / 25.4 mm 16" / 406 mm
Normal Diametral Pitch DP-12 DP-0.785 DP-1 DP-0.785
Normal Module Mn-2 Mn-32 Mn-2 Mn-32
AGMA QUALITY AGMA 8 AGMA 10 AGMA 11 AGMA 15
Hardness 335 BHN 415 BHN 55 Hrc 62 Hrc

C* Only Double Helical Gears. The Gap width can vary depending on the teeth module.
** With Trough-Hardened gears (Tempered) the grinding process improves the tooth contact increasing the power transmission capability considerably, the grinding process is optional and may apply additional costs.

Diagram

Manufacturing Capabilities

Spur, Helical & Double Helical Bull Gears.
Heavy Duty Low Speed.

Description Ref Tempered & Ground** Carburized & Ground
MIN. MAX. MIN. MAX.
Inch / mm Inch / mm
External Diameter A 60" / 1,524 mm 472" / 12,000 mm 60" / 1,524 mm 315" / 8,000 mm
Face Width B 5" / 127 mm 30" / 760 mm 5" / 127 mm 40" / 1,000 mm
Double Helical Gap Width* C* 2" / 50.8 mm 4" / 101 mm 2" / 50.8 mm 4" / 101 mm
Normal Diametral Pitch DP-3 DP-0.78 DP-13 DP-0.785
Normal Module Mn-8 Mn-32 Mn-2 Mn-32
AGMA QUALITY AGMA 8 AGMA 10 AGMA 10 AGMA 10
Hardness 280 BHN 380 BHN 55 Hrc 60 Hrc

C* Only Double Helical Gears. The Gap width can vary depending on the teeth module.
** With Trough-Hardened gears (Tempered) the grinding process improves the tooth contact increasing the power transmission capability considerably, the grinding process is optional and may apply additional costs.

Diagram

Manufacturing Capabilities

Spiral & Straight Bevel Gears.
Heavy Duty Low Speed.

Description Ref Tempered & Ground** Carburized & Ground
MIN. MAX. MIN. MAX.
Inch / mm Inch / mm
External Diameter A 13" / 330 mm 78" / 2,000 mm 13" / 330 mm 78" / 2,000 mm
Face Width B 5" / 127 mm 40" / 1,000 mm 5" / 127 mm 40" / 1,000 mm
Total Length C 9" / 228 mm 70" / 1,800 mm 9" / 228 mm 70" / 1,800 mm
Normal Diametral Pitch DP-12 DP-1 DP-12 DP-1
Normal Module Mn-2 Mn-25 Mn-2 Mn-25
AGMA QUALITY AGMA 8 AGMA 10 AGMA 10 AGMA 12
Hardness 335 BHN 415 BHN 55 Hrc 60 Hrc

Bevel Type Gears can only sold in sets of Gear and Pinion shaft, not manufactured separately.
** With Trough-Hardened gears (Tempered) the grinding process improves the tooth contact increasing the power transmission capability considerably, the grinding process is optional and may apply additional costs.

Diagram

Manufacturing Capabilities

Spiral & Straight Bevel Gears.
Heavy Duty Low Speed.

Description Ref Tempered & Ground** Carburized & Ground
MIN. MAX. MIN. MAX.
Inch / mm Inch / mm
External Diameter A 13" / 330 mm 78" / 2,000 mm 13" / 330 mm 78" / 2,000 mm
Face Width B 5" / 127 mm 40" / 1,000 mm 5" / 127 mm 40" / 1,000 mm
Total Length C 9" / 228 mm 70" / 1,800 mm 9" / 228 mm 70" / 1,800 mm
Normal Diametral Pitch DP-12 DP-1 DP-12 DP-1
Normal Module Mn-2 Mn-25 Mn-2 Mn-25
AGMA QUALITY AGMA 8 AGMA 10 AGMA 10 AGMA 12
Hardness 335 BHN 415 BHN 55 Hrc 60 Hrc

** With Trough-Hardened gears (Tempered) the grinding process improves the tooth contact increasing the power transmission capability considerably, the grinding process is optional and may apply additional costs.

Diagram

URGENT REPAIR 24/7
worldwide

01 800 536 1771 | (+52-55) 5387 1500